NEWS
相关资讯

What is a slurry pump?

日期:2024/11/2 11:09:50 访问:17 作者:小橙子

Slurry pump is a type of centrifugal pump based on physical principles. Conceptually, it refers to a device that increases the energy of a solid-liquid mixture medium through the action of centrifugal force (rotation of the pump impeller), converting electrical energy into kinetic and potential energy of the medium. The name of slurry pump is a centrifugal pump classified from the perspective of conveying medium.

Slurry pump.

Slurry pumps can also be classified into different types from different perspectives.

Divide the number of impellers by: single-stage slurry pump and multi-stage slurry pump.

From the position of the pump shaft above the horizontal plane, it can be divided into horizontal slurry pumps and vertical slurry pumps.

3. The ways of sucking water from the impeller are divided into single suction slurry pump and double suction slurry pump.

4. Structure of pump casing: horizontal split and vertical combination.

Therefore, for many types of pumps, it can be named slurry pump or not. The following are some recognized slurry pump models shared by slurry pump manufacturers, hoping to provide some assistance when you choose slurry pumps.

ZGB slurry pump features:.

1. The pump body adopts double-layer pump casing (upper and lower double-layer metal structure or outer layer metal, inner layer rubber) and single-layer pump casing (single-layer shell metal structure) as needed.

The shell structure of the double-layer pump is a vertical split type. The position of the water outlet can be set at 45 intervals, rotated and installed in 8 different positions.

3. Advanced structure.

4. Efficient and energy-saving.

Characteristics of ZJ slurry pump:.

1. The pump body adopts double-layer pump casing (upper and lower double-layer metal structure or outer layer metal, inner layer rubber) and single-layer pump casing (single-layer shell metal structure) as needed.

The shell structure of the double-layer pump is vertical. The position of the water outlet can be set at 45 intervals, rotated and installed in 8 different positions.

3. Advanced structure.

4. Efficient and energy-saving.

The purpose and characteristics of SP and SPR submersible pumps.

SP and SPR pumps are vertical centrifugal slurry pumps immersed in liquid, used for transporting abrasive, coarse particles, and high concentration slurry pumps. It does not require any shaft seal or shaft seal water and can work normally even under conditions of insufficient suction. The pump body of the SP type pump is made of wear-resistant metal, and the impeller is made of wear-resistant metal, rubber, and polyurethane materials. SPR type is an immersion type with rubber lining in the following areas, suitable for transporting corrosive slurries.